Install Earthsiege 1 Expansion Pack

Before there was Pacific Rim, there was Metaltech! Enter the Earthseige! Enter the Battledome! Enter this section of the forum for any comments, questions or problems with any of the Metaltech games!
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

Hello there,

I've found the expansion pack for Earthsiege under the following link from this site:
http://www.sierrahelp.com/Misc/GameAddo ... eExpansion

and want to install it, but there is problem. I tried to install it via DOSBox and it works fine until the install setup ask for the "Disk 2".
I mounted a cdrom drive in DOSBox with the line

mount d o:\ -t cdrom

but when I insert the Disk 2 and tried to continue the installation, the dialog "please insert the disk labeled with 'Disk 2' " doesn't disappear.
What is my mistake and can anybody tell me how I can install the expansion pack?

greetz
hlidskialf
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

Press Ctrl+F4 to refresh the drive cache.
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

Hi Collector,

I tried to refresh the drive cache, but it doesn't work. The dialog (screenshot) do not dissappear. =/
Do you have any other ideas?
Attachments
Earthsiege 1 Expansion install
Earthsiege 1 Expansion install
copyfilz_000.png (5.61 KiB) Viewed 7197 times
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

I tweaked the batch file and re-uploaded it. Give it a try again.
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

It doesn't help. =/
After the "resource.000" processing it wants the disk 2.
Maybe I make mistake? I extract the files in a folder and make a iso file with CDBurnerXP.
Than I insert the iso in my virtual drive (o: letter in windows) mount a cdrom drive (e: letter in DOSBox) in DOSBox and normally start the install batch from the cd.
It works fine until it wants to extract the "resource.001" file.
Maybe it needs more parameters in the mounting step?
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

No need to mess around with a CD. Just mount the unzipped folder as a floppy.
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

It's the same like before. btw refreshing the cache doesn't help too.
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

I'll have to take a look at it, but it may be a while before I can do much with it.
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
User avatar
dotkel50
Village Elder
Posts: 2168
Joined: Wed Feb 18, 2009 4:22 pm
Gender: Female
Location: Boston, MA, USA

Re: Install Earthsiege 1 Expansion Pack

Post by dotkel50 »

hlidskialf wrote:mount d o:\ -t cdrom
Try: mount d o:\ -t cdrom -ioctl
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

No, it is because he was mounting the content of all three as a single disc (CD). They were intended to be copied to three floppies. He should have been mounting the first as a floppy, swapped the contents of the folder with the 2nd and refresh the drive cache when prompted for the 2nd disk, swapped and refreshed with the third when prompted.

Anyway, I have adapted it to modern usage. Just unzip to a folder, mount that folder as "A:\" and run the install. Just make sure that ES is already installed in a folder of SIERRA\MTECH inside of the folder mounted as C:\, first.

hlidskialf, give it one more try. Don't mess around with a CD, just mount the unzipped folder as drive "A:\".
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

I have tried it again but with no success.
I will give you a picture documentation.
1st:
Attachments
03.JPG
02.JPG
01.JPG
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

2nd
Attachments
06.png
06.png (6.24 KiB) Viewed 7175 times
05.png
05.png (6.29 KiB) Viewed 7175 times
04.png
04.png (6.37 KiB) Viewed 7175 times
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

and 3rd
Attachments
07.png
07.png (5.6 KiB) Viewed 7175 times
User avatar
Collector
Grand Poobah
Posts: 12013
Joined: Wed Oct 08, 2008 12:57 am
Location: Sierraland
Contact:

Re: Install Earthsiege 1 Expansion Pack

Post by Collector »

You didn't download it again. There is no longer an English directory.
01000010 01111001 01110100 01100101 00100000 01101101 01100101 00100001

Image
hlidskialf
Noob
Posts: 10
Joined: Sun Aug 08, 2010 11:50 am

Re: Install Earthsiege 1 Expansion Pack

Post by hlidskialf »

:)

Now it works! I don't see that you've upload another zip file. With this new file I can install the expansion and the prog no longer asks for a second or third disk.
Thank you very much Collector!

The topic can be closed.
Post Reply

Return to “METALTECH Series”